Being one of the reputed organizations in the market, we are engaged in offering Air Texturing Machine.

Use:

• It feeds continuous fibers (POY/FDY) such as nylon and polyester
• It produces high-quality ATY stably at high speed

Features:

• Trouble free performance
• High functionality
• Minimum maintenance require

Specification:

• Types of windingBi conical
• Mechanical speedup to 1100 m/min (process speed depending on process parameter)
• Package ShapeCylindrical or 6, 12, 18 Bi conical.
• Package weightup to 5 Kg
• Take-up package diameterup to 300 mm
• Take - up Tube57 / 69 mm dia x 290 mm length.
• Take-up UnitHPS Cradle most compact & uniform package density
• For best unwinding performance even at higher speed.
• Traverse length230….250 mm
• Traverse SpeedUp to 600 Cycles / Min.
• Feed CreelBox Creel, package dia up to 435 mm / 22 kg.
• Fibre / Flore structurePES, PA, PP, PBT, PTT, Glass (other yarns on request) / POY, FDY / FOY
• Count range (yarn path type 3)PES and PP up to 1’500 dtex, PA up to 650 dtex.
• (coarser counts possible depending on feed material and process Parameters)
• Count rangePES and PP up to 4’000 dtex, PA up to 1’400 dtex.
• (coarser counts possible depending on feed material and process parameters)
• Count range (yarn path type 6)PES and PP up to 2’000 dtex, PA up to 700 dtex
• Layout / N of spindles min/maxsingle sided / min. 4/max. 40
• Gauge450 mm
• Positions and FeedersIndividually driven and controlled
• Electrical power (basic power supply)400 V , 50 cycles, 3 phases, loadable neutral power line, ground
• Installed powerFeeding motors 8 x 370 w, heated 1.1 kw each;
• Plum exhaust system 20 spindle; 1.5 m set heaters 0.4 kw each
• Power consumption (expected average)30 – 50 % of Installed power (depending on process Parameters)
• Water consumptionmax. 4 liters per position and hour. 7.5% Used & Brine.
• Recommendation for compressed air/
• Compressor with a capacity of up to 30 m per position andcompressor with a capacity of up to 30 m per position hour with
• Process air requirementAir dryer, oil filter and air tank (-3m), process air requirement min. 12 bar