( Price inclusive of all taxes )
Availability: In stock
|Specifications||H-400||H- 450||H- 500||H-550|
|Admit between Center||1000mm -7000mm||1000mm-7000mm||1000mm-7000mm||1000-7000mm|
|Swing over Bed||800mm||900mm||1000mm||1100mm|
|Swing over Cross Slide||500mm||600mm||700mm||800mm|
|Swing in Gap||1150mm||1250mm||1350mm||1450mm|
|Width of Gap||300mm||300mm||300mm||300mm|
|Width of Bed||450mm||500mm||550mm||600mm|
|Spindle Bore / Taper||104mm / MT-6||104mm / MT-6||104mm / MT-6|
|Spindle Speed / Range||8 / 20-300rpm||8 / 20-300rpm||8 / 20-300rpm||8/20-300rpm|
|Motor||5hp / 7.5hp / 10hp||5hp/7.5hp/10hp||5hp/7.5hp/10hp||5hp/7.5hp/10hp|
|Tailstock RAM Dia.||100mm||100mm||100mm||100mm|
|RAM Travel / Taper||250mm / MT-6||250mm / MT-6||250mm / MT-6||250mm / MT-6|
Hardened and ground bed, Hardened & Ground Threaded Spindle Nose, with Change Gears for Metric/Inch Thread, Turcite-B lining in saddle Guideways, complete with Electric Motor and Electricals, Machine is Tested to IS-1878 (Part) 1993.
Complete with electrical for 415 volts, 50 cycles, 3ph supply, Carrier Plate, Center Bush, 2Nos. MT Dead Center, Toolpost spanner, thread dial indicator, 4 way tool post and instruction manual with beam packing.