JavaScript is disable on your browser.For full functionality of this page it is necessary to enable JavaScript. Here are the instructions how to enable JavaScript in your web browser
Air Pinch Valve By : Shreyas Engineering Corporation , Ahmedabad
Quantity in stock : 120

Rs. 2500.00

( Price inclusive of all taxes )

Availability: In stock

Ask for Best Price Beta

industrial valves

Size

Description

Working & principle of PRECISE AIR PINCH VALVE -

An Air pinch valve is a pinch valve. Air or liquid pressure is inserted in the cavity of AIR PINCH VALVE - at the control inlet collapses the internal rubber sleeve to provide immediate and positive shut-off. The rubber sleeve closes completely, even on large particulate matter, abrasive and corrosive materials. When open, the sleeve allows full, unobstructed flow with little turbulence. Air pinch valve sleeves can be easily and economically replaced when they wear out.

SIZES AVAILABLE
  • SCREWED END 15, 25,40 & 50 MM
  • FLANGE END 15, 25, 40, 50, 75 & 100MM
  • SLEEVE AVAILABLE - NEOPRENE, NATURAL, HYPALONE, EPDM, VITON, SPECIAL ABRASSION RESISTANT
  • PRESSURE UPTO 6 BAR
POSITIVE OPERATION

Air pinch valves give fast & positive shut-off of most industrial materials, liquids, and dry flowable materials. Air pinch™ pinch valves will close tightly on suspended particulate materials in liquids. Even highly viscous materials are no problem.

Air pinch valves are versatile because of their unique flow-through design. It provides fast & smooth rapid operation, 100% full way, unobstructed flow, and complete close design. It can be mounted in any position or direction, & also works perfect even in fully submerged condition.

Economical design

Air pinch valve housings are light weight and well suitable to use where heavy valves not required or won’t work. investment casting in wcb/cast steel, or investment casting cast stainless steel. No moving parts hence a sturdy long lasting valve at an economical fair price.

Pinch Valve Operation / Operation Pressures

Operating pressures for controlled material vary depending on sleeve elastomer and valve size, and can range from a moderate vacuum (up to 26" Hg) to a maximum of 90 psi when controlling with air.

Required control pressure is normally 20 to 40 psi greater than the material pressure. Use of excessive actuation pressure (air or liquid) than that which results in complete valve closure will impact sleeve life. Use of actuation pressure above 90 psi is not recommended.

Available Material of Construction

CAST IRON, CAST STEEL – WCB, STAINLESS STEEL, ALLUMINIUM, POLY PROPILENE

 

Related Other Company Products